Product Description
Arlington DBVR1W - Low Profile Vertical Recessed IN BOX for Retrofit Construction with White Cover
One-piece, recessed electrical box with weatherproof-in-use cover for flat surfaces in existing construction.
- Non-metallic cover and base
- Accepts most single gang wiring devices
- Uses standard indoor wall plates or a cover plate.
- UV rated plastic for long outdoor life
- Installs in the wall, so less of it shows outside.
- Cover is removable for added convenience
- Standard duplex and GFCI cover plates, installed NM cable connector, and (4) #8 x 3/4" & #8 x 1-1/4" stainless steel screws included
- No gaskets required
Meets 2005 NEC Section 406-8, for the protection of exterior weatherproof while-in-use cover for all outdoor 15 or 20 AMP receptacles.
Product Videos
Custom Field
Product Reviews
1 Review
-
Good with flaws
I have put many of these in and for some odd reason lately there is a flaw in the manufacturing. The door should clip/click in but last last few I ordered its loose. So, the slightest pressure would open the door. Also, if it were intended to be this way, why hace a clip there and just nothing at all. You can also see a slight bow or arch to the bottom which is why it doesn't clip. If it were flat it would probably clip. Not sure I like the so called seal which is essentially duct seal. It does seal but the unit will bump out away from the wall because the sealing material is not really compressable. With that said, its still the only recessed in use box out there so I probably would buy again and modify unit to clip.