Product Description
Leviton 1450R - 50 Amp 125/250V EV Charging Receptacle/Outlet, Heavy Duty
50 Amp, 125/250 Volt, NEMA 14-50R, 3-Pole, 4-Wire, Heavy Duty Flush Mount EV Charging Receptacle/Outlet, Straight Blade, Industrial Grade, Grounding, Side Wired, Steel Strap - Black
Designed specifically for plug-in EV charging applications, Leviton's 1450R and 1450W power receptacles are built to outperform and outlast. With its robust design and performance, the 50A Heavy Duty Power Receptacle can sustain the necessary extended charge time and high frequency of insertions EV chargers require. This receptacle offers the perfect option for homeowners who prefer a plug-in application as opposed to a hardwire application and for future-focused new construction MDU projects that want to present an EV-ready environment.
- Built of durable, high-impact nylon
- Pressure-wire terminal connections ensures full-contact with the conductors
- Features heavy-gauge, high-performance copper contacts
- Accurate, efficient wiring with terminal IDs marked
- High torque value to ensure proper connection: terminals require 75 in lbs
Electrical Specifications
- Amperage : 50 A
-
Device : Flush Mounted Single Receptacle
-
Flammability : Rated HB or better UL94
-
Grade : Industrial
-
Grounding : Grounding
-
NEMA : 14-50R
-
Operating Temperature : -40°C to 60°C
-
Pole : 3
-
Terminal ID : X (Brass screw or Black screw) = Hot, Y (Brass screw or Black screw) = Hot; White (Silver screw) = Neutral; Green (Green screw) = Ground
-
Torque Range : 75 in-lbs.
-
Voltage : 125/250 VAC
-
Wire : 4
-
Wire Gauge : For use with #4, #6 or #8 AWG copper wire ONLY. May use #10 AWG solid wire for ground connection. DO NOT use with copper-clad or aluminum wires on this device.
Product Features
-
Application : Home
-
Device Type : Receptacle/Outlet
Material Specifications
-
Face Material : Nylon
-
Strap Material : Heavy Gauge Galvanized Steel
Standards and Certifications
-
cULus : cULus
-
RoHS Compliant: Yes
AC Horsepower Ratings
-
At Rated Voltage : 3 HP
Warranty
-
Warranty : 2-Year Limited
WARNINGS
• TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT THE POWER IS OFF
BEFORE WIRING!
• TO AVOID PERSONAL INJURY OR DEATH, DO NOT USE THE MOUNTING SCREWS SUPPLIED IN THE WALLPLATE SCREW HOLE.
THE MOUNTING SCREWS SHOULD ONLY BE USED IN THE MOUNTING SCREW HOLES. PLEASE SEE DIAGRAM (BELOW).
• DO NOT use with single-gang wallboxes.
• To be installed and/or used in accordance with appropriate electrical codes and regulations.
• If you are not sure about any part of these instructions, consult an electrician.
NOTE: For use with #4, #6 or #8 AWG copper wire ONLY. May use #10 AWG solid copper wire for ground connection. DO NOT use with copper-clad or aluminum wires on this device.
Installation instructions
• Strip wire exposing 11/16 inch (1.8 cm) of conductor.
Warning: Stripping wire too short may result in pinching insulation between screw and terminal.
Warning: It is important that conductors are not damaged during this process, if damaged cut off section and repeat step.
Caution: For replacement of existing device, it is recommended to cut off used portion of wire and strip new section.
• Identify and insert wires into appropriate terminals using wiring diagram.
• Tighten terminals screws to 75 in-lbs.
Warning: Wire must be torqued to 75 in-lbs., the torque MUST be maintained for a minimum of 5 seconds with a constant torque reading of 75 in-lbs.
MUST repeat this step after all wires have been initially secured to 75 in-lbs.
